Table of Contents
Advertisement
training, and having the corresponding qualifications.
2.5
Lightening & Grounding Protection
You must protect the eNB against lightning. Following are guidelines concerning
grounding.
The yellow-green ground wire must be at least 10mm
In principle, always place the grounding as near as possible to the equipment.
Connect to a reliable outdoor grounding point (earth) using one ground screw.
The connection of the grounding points and ground bar need to be tight and reliable.
Rustproofing the terminals, e.g., with anti-oxidant coating or grease, is required.
2
in diameter.
9
Advertisement
Table of Contents
