Identity
Color
ALM
Red
1.4
Technical Specification
1.4.1 Hardware Specification
Item
LTE Mode
LTE Frequency
Channel Bandwidth
Output Power
Receive Sensitivity
Synchronization
Backhaul
MIMO
Dimension
Installation Type
Antenna Type
Antenna Gain
Power Consumption
Power Supply
Weight
MTBF
MTTR
NOTE: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.
1.4.2 Global Part Numbers
Model No.
pBS3101S
Status
Slow flash: 1s on,1s off
Steady On
OFF
LTE TDD
Band48, and partial band42,band43
5MHz, 10MHz, 15MHz, 20MHz per carrier
24 dBm per antenna
-100 dBm
GPS
1 RJ-45 Ethernet interface (1 FE/GE)
DL 2 x 2 on each carrier, 2 carriers
309mm(H) x 227mm(W) x 104mm(D)
Pole or wall mount
Built-in 4 high-gain LTE antennas
Horizontal Beamwidth 65± 10°
Vertical Beamwidth 17°
Polarization: ± 45°
13.5 ± 0.8 dB
Typical 20W, MAX 25W
PoE++, comply with IEEE 802.3bt standard
4.85kgs
≥ 150000 hours
≤ 1 hour
Band48, 10MHz, 20MHz per carrier, DL 2 x 2 on each
carrier, 2 carriers
CELL2 is in activated.
Hardware alarm
No alarm
Description
Description
, Built-in
antenna.
3
Description