evertz 5550 Operating Instructions Manual page 16

7. kk head compat'l
This item sets the 5500 for compatibility with the keykode pickup head. The original Evertz
pickup heads were designated EV35 and EV16 etc., and were commonly used with the RIM
DIGISYNC. The new pickup heads are designated KK35 and KK16 etc. These heads typically
have fine slits cut into the body and were designed to work with the 5500. Use the right and left
arrows to select the operating mode which corresponds to your particular pickup heads.
8. debug mode off
When debug mode is on, several debug displays are added to the extended displays. These are
listed in figure 3-4, in the manual. Debug mode should be left off unless you are otherwise
directed by Evertz staff.
B_ENGMNU.DOC
5288 John Lucas Drive, Burlington, Ontario, Canada, L7L 5Z9
ev head compat'l
debug mode on
Page 2 of 2
Evertz Microsystems Ltd.
Tech Support: Phone 905-335-3700
Fax 905-335-3573
Internet: eng@evertz.com
95/1/23