Danfoss ECL Comfort User Manual page 79

Set your room / air duct
temperature
Go to display A.
Setting the desired temperature
2
Select the constant comfort mode.
Set the desired temperature for the comfort
mode.
Select the constant setback mode.
Set the desired temperature for the setback
mode.
Select the desired mode (section 2).
Connected
sensors
S3
S2 / ECA 60 /
ECA 61
S3
Desired temp. in
0
comfort mode
Setting
Air duct temperature A (yellow side)
S2 / ECA 60 / ECA 61:
Room temperature
S3:
Balance temperature
Desired temp. in
1 6
setback mode
Display
A (yellow side)
C (grey side)
The yellow
side of the
ECL Card
3