Balance Temperature - Line C - Danfoss ECL Comfort User Manual

20
Balance temperature
- line C
C
C Balance temperature
Circuit
I
The balance temperature (also the desired flow temperature)
is only active if temperature sensor S2 has been connected
(see line 3).
Set the temperature that fits your system.
The balance temperature is the basis for the S3
temperature (flow / air temperature). The balance
temperature can be influenced by S2 (room
temperature), S1 (compensation temperature), and
S4 (the limitation temperature).
The grey
side of the
ECL Card
1 1 2
2 3
ON ON ON
2 0
Setting range
-20 ... 110 °C
Factory setting
20 °C