Danfoss ECL Comfort User Manual page 50

32b
Service parameter(s) 21
21 Total stop
Circuit
I
Decide whether you want a total stop during the setback
temperature period.
ON: The desired flow temperature is lowered
OFF: No total stop
The grey
side of the
ECL Card
Setting range
ON / OFF
to 10 °C. The min. setting of the flow
temperature (line 2, section 22) is overruled.
Desired flow
temp. (°C)
10 °C
Desired flow
temp. (°C)
10 °C
Factory setting
ON
Time
Time