Status Leds; Module Status Leds - evertz 7800 Manual

4.

STATUS LEDs

4.1.

MODULE STATUS LEDS

MODULE STATUS:
LOCAL FAULT:
VIDEO A, VIDEO B:
GENLOCKED:
Module
Status
Shaft
Encoder
Local
Fault
Input B
Not Used Not Used
Present
Input A
Genlock Not Used Not Used
Present
Module
Status
Local
Fault
Input B
Not Used Not Used
Present
Input A Genlock
Shaft
Not Used Not Used
Present Present
Encoder
This Green LED will be on when the module is operating properly.
This Red LED makes it easy to identify one module in a frame that is missing an
essential input or has another fault.
The LED will be on when there is no valid video on either video path.
The VIDEO Red/Green LEDs (status for input A is the LED on the bottom of the
PCB first on the Left, status for input B is second from the left). These LEDs will
indicate the video presence of the composite analog inputs.
Red = Video not present
This Green LED is on solid if the user selected genlock source (either external
input or from the frame) is present and the user has turned on genlocking.
It is flashing if the user has turned on genlocking and the selected genlock
source is not present.
It will be off if the user has turned genlocking off.
Revision 1.0
7737/7837CD2 Dual Composite Decoder
Not Used Not Used
Not Used
Not Used Not Used
Not Used
Green = Valid Video Detected
7800 MultiFrame Manual
7837CD2
7837CD2-A8
7837CD2-A8
Page - 9