Status Leds; Module Status Leds - evertz 7700 Manual

4.

STATUS LEDs

4.1.

MODULE STATUS LEDS

MODULE
STATUS
toggle
switch
LOCAL
FAULT
MODULE STATUS:
LOCAL FAULT:
VIDEO A, VIDEO B:
GENLOCKED:
VIDEO B GENLOCK
PRESENT STATUS
button
VIDEO A
PRESENT
This Green LED will be on when the module is operating properly.
This Red LED makes it easy to identify one module in a frame that is missing an
essential input or has another fault.
The LED will blink on and off if the microprocessor is not running.
The LED will be on when there is a fault in the module power supply or a user
configurable error condition exists.
The VIDEO Green LEDs (status for input A is the LED closest to the PCB and
status for input B is away from the PCB). These LEDs will indicate the video
presence of the composite analog inputs.
This Green LED is on solid if the user selected genlock source (either external
input or from the frame) is present and the user has turned on genlocking.
It is flashing if the user has turned on genlocking and the selected genlock
source is not present.
It will be off if the user has turned genlocking off.
Revision 1.0.4
7736CD2 Dual Composite Decoder
push
7700 MultiFrame Manual
7736CD2
Page - 9