Appendix; Appendix A General Specifications - Epson TM-290-II Operator's Manual

APPENDIX A General Specifications

Printing Specifications
1.
Print
(1) method:
(2) Head wire configuration:
(3) Printing direction:
(4) Lines per second:
(5) Characters per line:
(6) Characters per inch:
(7) Paper feed speed:
2. Character Specifications
(1) Character set:
(2) Character structure:
(3) Character size:
Table A.1 Lines Per Second, Characters Per Inch, Characters Per Line,
Character Size
Character Structure Character tine Per Characters Character Size
(Horizontal Character Per Inch
X Vertical) Set
ANK
5 x 7
Graphics
7 x 7
ANK
Graphics

APPENDIX

Impact dot matrix
Shuttle-type 7 pin
Uni-directional
Refer to Table A. 1
Refer to Table A. 1
Refer to Table A. 1
Approx. 25 lines/sec (105 mm/sec)
(When the ESC+d+(n) and
are selected)
Alphanumeric characters: 95
Katakana:
International:
Extended Graphics:
5x7: l-dot spacing (normal dot)
7x7: 3-dot spacing (half dot)
Refer to Table A. 1
Second
(LPS)
(mm)
0 . 6 3
Approx.
0 . 3 1 5 1 . 9 t o 2 . 3
0.63 ____ Approx.
0.315 1.9 to 2.3
- 4 6 -
FF
commands
64
32
128
(mm)
Per tine
(Column) (Width x Height)
1.6X2.9
3 5
1 . 9 x 2 . 9
1.3x2.9 _____
1.6X2.9
42