Commissioning; Unpacking The Centrifuge; Remove The Transport Lock - Hettich MIKRO 220 Operating Instructions Manual

Commissioning

5 Commissioning
5.1

Unpacking the centrifuge

5.2

Remove the transport lock

18 / 40
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 9 .
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1. If present: Remove the packaging tapes.
2. Lift the box up and remove the padding.
3. Remove the accessories and store them safely.
4. Place the device on a stable and level surface.
Personnel:
■
Trained user
The lid is closed.
Rev.: 04 / 11.2023
Chapter 3 'Device overview'
AB2200en_SA