Disposal; General Instructions - Hettich MIKRO 220 Operating Instructions Manual

Disposal

10 Disposal
10.1

General instructions

Fig. 19: Household waste ban
38 / 40
The device can be disposed of via the manufacturer.
A Return Material Authorisation (RMA) form must always be
requested for a return.
If necessary, contact the Technical Service Department of
the manufacturer.
−
Andreas Hettich GmbH & Co. KG
−
Föhrenstrasse 12
−
78532 Tuttlingen, Germany
−
Phone: +49 7461 705 1400
−
E-mail: service@hettichlab.com
WARNING
Risk of pollution and contamination for people and the envi-
ronment.
When disposing of the centrifuge, people and the environ-
ment may be polluted or contaminated by incorrect or
improper disposal.
−
Removal and disposal may be carried out only by a
trained and authorised service personnel.
The device is intended for the commercial sector ("Business to Business" -
B2B).
According to Directive 2012/19/EU, the devices may no longer be disposed
of with household waste.
The devices are assigned to the following groups according to the Stiftung
Elektro-Altgeräte Register (EAR (German foundation under civil law)):
■
Group 1 (heat exchangers)
■
Group 5 (small devices)
The crossed-out wheelie bin symbol indicates that the device must not be
disposed of with household waste. Regulations governing disposal of such
devices may differ in individual countries. If necessary, contact the supplier.
Rev.: 04 / 11.2023 AB2200en_SA