Commissioning; Unpacking The Centrifuge; Remove The Transport Lock - Hettich UNIVERSAL 320 Operating Instructions Manual

Commissioning

5 Commissioning
5.1

Unpacking the centrifuge

5.2

Remove the transport lock

18 / 44
5. Insert 3 transport locks (
6. Screw in 3 screws (
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 9 .
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1. Unscrew the screws on the lid of the wooden packaging and store
them.
2. Remove the lid.
3. Unscrew the screws on the side panels of the wooden packaging and
store them.
4. Remove the side panels.
5. Remove padding and strips.
6. Remove the device and accessories by lifting them up out of the box.
7. Place the device on a stable and level surface.
Personnel:
■
Trained user
The lid is closed.
Rev.: 04 / 11.2023
1 ).
2 ) with spacer sleeves ( 3 ).
Chapter 3 'Device overview'
AB1401en_SA