Commissioning; Unpacking The Centrifuge - Hettich ROTOFIX 32 A Operating Instructions Manual

Commissioning

5 Commissioning
5.1

Unpacking the centrifuge

16 / 38
1
2
3
Fig. 13: Transport lock
1 Transport lock
2 Spacer sleeves
3 Screws
1. Tilt the device on the back of the device.
2. Insert 3 transport locks (
3. Screw in 3 screws (
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 9 .
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1. If present: Remove the packaging tapes.
2. Lift the box up and remove the padding.
Rev.: 00 / 11.2023
2
2
1 ).
3 ) with spacer sleeves ( 2 ).
Chapter 3.1 'Technical data'
3
2 3
AB1207en
1