Busch-Jaeger Busch-Welcome IP Product Manual page 53

2. Connecting to WiFi
Please follow the steps below:
[1] On the "Network connections" screen, tap "Network".
[2] Tick the check box to enable WiFi function.
[3] Select the designated WiFi from the available list or tap "Connect manually" to enter the
WiFi name manually (in case the WiFi name is not found on the list).
[4] Enter the WiFi password.
[5] "DHCP" is enabled by default. You can untick the check box and enter the IP address
manually.
[6] Tap "Connect".
Product manual 2TMD042300D0041
Commissioning
│53