Configuring The Lock - Busch-Jaeger Busch-Welcome IP Product Manual

8.4.3

Configuring the lock

1. Configuring the power lock
Please follow the steps below:
[1] On the "Actuators" screen, go to the "Power lock" section.
[2] Select the output mode from the drop-down list. It can be set to "AC output", "DC output
(NC)" or "DC output (NO)".
[3] Enter the unlock time (default 5 seconds).
[4] Tap "X Settings" to exit the setting.
[5] Tap "OK" to save the change.
Product manual 2TMD042300D0041
Commissioning
│128