Busch-Jaeger Busch-Welcome IP Product Manual page 107

4. Adding the device manually
Please follow the steps below:
[1] On the "Trusted Devices" screen, tap "
[2] Select "Entry manually".
[3] Select the device type from the drop-down list. It can be set to "2nd OS", "Private IP
actuator" or "Indoor station".
[4] Enter the device number.
[5] Enter the serial number.
[6] If the device is connected to the router in the same apartment, then this function should be
disabled.
[7] Tap "Save & Close".
Product manual 2TMD042300D0041
".
Commissioning
│107