Busch-Jaeger Busch-Welcome IP Product Manual page 21

[5] Select "Panel set-up for single family house", tap "
[6] Tap "Continue".
[7] On the "Panel Addressing" screen, select the mode for the panel. It can be set to "Master
mode" or "Subsidiary mode". Only one Indoor Station can be set to "Master mode" in the
same apartment.
[8] Enter the block number, the floor number and the room number.
If the panel is set to "Subsidiary mode", you need to enter the device number.
■
[9] Select home network port for this panel. It can be set to "WiFi" or "LAN".
[10] Tap "Continue".
Product manual 2TMD042300D0041
Commissioning
" to see more details.
│21