3. Configuring the repeat ringtone
Please follow the steps below:
[1] On the "Sound" screen, tick/untick the check box to enable/disable the function.
Enable (default) = rings repeated ringtone within 30 seconds
■
Disable = rings only once
■
4. Identifying the incoming call devices through the ringtones
Please follow the steps below:
[1] On the "Sound" screen, select the ringtone (built-in 4 ringtones) from the drop-down list. The
panel will ring the designated ringtone during an incoming call to indicate the device type.
Product manual 2TMD042300D0041
Commissioning
│50