Configuring The "Mute" Function - Busch-Jaeger Busch-Welcome IP Product Manual

9.9.2

Configuring the "Mute" function

Please follow the steps below:
[1] On the dashboard, tap the voice icon "
[2] On the pop-up window, select the mute type. It can be set to "2 hours", "Today" or "Always".
[3] Select the relevant objects.
If "For all panels" is disabled, the mute function only applies to the current panel.
■
If "For all panels" is enabled, the mute function will apply to all panels in the same
■
apartment.
If the panel is restarted, all the settings about the "Mute" function will be cleared.
Product manual 2TMD042300D0041
".
Operation
│182