Busch-Jaeger Busch-Welcome IP Product Manual page 33

[14] Create a building structure on the APP. For more details, see chapter 8.1.4 "Creating a
building structure on APP" on page 35.
[15] Use the APP to scan the QR code on the designated panels. For more details, see chapter
8.1.5 "Scanning the QR code on the panel" on page 39.
[16] Import the building structure from APP to SmartAP. For more details, see chapter 8.1.6
"Importing the building structure from APP to SmartAP" on page 41.
Concerning the steps 14 - 16, if the step has been completed, please move to the next step.
After importing the building structure, SmartAP will set the physical address for the designated
panels and assign the signatures at the same time.
Product manual 2TMD042300D0041
Commissioning
│33