Busch-Jaeger Busch-Welcome IP Product Manual page 27

[10] Enter the physical address, e.g. the block number, floor number and apartment number.
If the panel is set to "Subsidiary mode", you still need to enter the device number.
■
If "Configuration via Welcome APP's scanning process" is enabled, the physical address of
■
this panel will be set via the APP.
[11] Tap "Continue".
[12] On the "Connect WiFi" screen, you can carry out this setting at this time or do it later by
pressing "Continue" if your WiFi is not ready. For more details, see chapter 8.2.4 "Network
settings" on page 52.
Product manual 2TMD042300D0041
Commissioning
│27