Table of Contents
Advertisement
8.5.10
Configuring the push buttons
Please follow the steps below:
[1] On the "Outdoor Stations" screen, go to the "Buttons set-up" section.
[2] Select "Columns of buttons" from the drop-down list. This setting is only available when
detecting the bar push-button module on the Outdoor Station. It can be set to "1" or "2".
[3] Tap "Push button settings".
[4] Tap the relevant push button.
[5] Tap "Edit device".
Product manual 2TMD042300D0041
Commissioning
│150
Advertisement
Table of Contents
