3. Configuration via SmartAP & APP
Outdoor Station
This configuration applies to buildings mainly.
■
In this case, SmartAP and mobile (APP) are needed.
■
In this case, all master panels and Outdoor Stations are connected to the community
■
network.
In this case, the Outdoor Station could be IP touch 5 Outdoor Station, IP keypad Outdoor
■
Station or IP pushbutton Outdoor Station.
In this case, SmartAP should complete its initial setup first. Please see the product manual
■
of SmartAP for more details regarding the initial setup.
In this case, the designated panels obtain the physical address via APP scanning setup.
■
In this case, all devices in the system obtain the signatures from SmartAP.
■
For more details, see chapter 8.1.3 "Configuration via SmartAP & APP" on page 29.
■
Product manual 2TMD042300D0041
Panel
Panel
PoE switch
Panel
Panel
PoE switch
Panel
Panel
PoE switch
Panel
Panel
PoE switch
SmartAP
PoE switch
CAT.5/IP bus line
Commissioning
Public camera
│19