Busch-Jaeger Busch-Welcome IP Product Manual page 48

4. Configuring the screensaver
Please follow the steps below:
[1] On the "Display" screen, tap "Screensaver".
[2] Go to the "Screen saver mode" section, select the screen saver mode from the drop-down
list. It can be set to "Default images", "Clock" (default) or "Weather from internet".
If "Default images" is selected, there will be 3 built-in images playing in a loop according to
■
the "Slide interval" setting (default: 10 seconds).
If "Clock" is selected, there will be a clock displaying the current time at a random location
■
on the screen.
If "Weather from internet" is selected, weather information will be displayed at a random
■
location on the screen. This option is available only when the weather data can be displayed
normally.
[3] Go to the "Start screen saver after" section, set the start time (default: 20 seconds). The
screensaver will start if no operation is carried out within the set time.
[4] Go to the "Turn display off after" section, set the screen off time (default: 2 minutes). The
screen of the panel will be turned off if no operation is carried out within the set time.
Product manual 2TMD042300D0041
Commissioning
│48