Configuring The "Manual Snapshot" Function - Busch-Jaeger Busch-Welcome IP Product Manual

8.3.4

Configuring the "Manual snapshot" function

If this function is enabled, you can take snapshots during door communication.
Please follow the steps below:
[1] On the "Advanced settings" screen, tap "Panel".
[2] Go to the "Options" section.
[3] Tick the check box to enable the function.
[4] Tap "X Settings" to exit the setting.
[5] Tap "OK" to save the change.
Product manual 2TMD042300D0041
Commissioning
│110