Linking The Exit Button With The Lock - Busch-Jaeger Busch-Welcome IP Product Manual

8.4.5

Linking the exit button with the lock

The exit button can be linked with the designated lock of the IP Actuator.
Please follow the steps below:
[1] On the "Actuators" screen, go to the "Lock Management" section.
[2] Select the lock type from the drop-down list. It can be set to "Power lock" or "Relay lock".
[3] Tap "X Settings" to exit the setting.
[4] Tap "OK" to save the change.
Product manual 2TMD042300D0041
Commissioning
│131