Busch-Jaeger Busch-Welcome IP Product Manual page 124

Commissioning
3. Configuring the private IP Actuator
Scenario 1: Location of IP Actuator = Internal
In this case, the IP Actuator is connected to the router in the apartment (see the diagram
below).
Co mmu nity ne two rk
Ho me ne two rk
Master
Switch
Router
D e vice ID: 1 ...3 2
Please follow the steps below:
[1] On the "Actuators" screen, go to the "IP Actuator device setting" section, tap "Set device
details".
Product manual 2TMD042300D0041 │124