Configuring The "Time Sync" Function - Busch-Jaeger Busch-Welcome IP Product Manual

8.5.11

Configuring the "Time sync" function

Please follow the steps below:
[1] On the "Outdoor Stations" screen, go to the "Buttons set-up" section.
[2] Select the sync time method from the drop-down list.
If "Sync with SmartAP" is selected, the Outdoor Station will sync the time from the
■
management software.
If "No sync" is selected, tap "Set time manually" to enter the time and date manually.
■
[3] Tap "X Settings" to exit the setting.
[4] Tap "OK" to save the change.
Product manual 2TMD042300D0041
Commissioning
│152