Busch-Jaeger Busch-Welcome IP Product Manual page 129

2. Configuring the relay lock
Please follow the steps below:
[1] On the "Actuators" screen, go to the "Relay lock" section.
[2] Select the output mode from the drop-down list. It can be set to "Unlock" (default) or "Turn
on the light".
[3] Enter the unlock time (default 5 seconds) or the time for turning on the light (default 30
seconds).
[4] Tap "X Settings" to exit the setting.
[5] Tap "OK" to save the change.
Product manual 2TMD042300D0041
Commissioning
│129