XCMG XCT80 Operation Manual page 97

XCT80 Truck Crane Operation Manual
on, indicating that the vehicle cannot be started
or the power take-off cannot be operated.
5. Engine speed hour meter (3 in Figure
6-4)
The engine speed hour meter consists of
the engine tachometer and hour meter. The
engine tachometer shows engine speed for the
driver to adjust the engine speed, to provide a
guarantee for the rational use of the engine. The
hour meter records the total operation time of
the engine, which will be displayed in the liquid
crystal display area.
6. Engine oil pressure gauge (10 in Figure
6-4) and engine oil pressure warning indicator
light
The engine oil pressure gauge indicates
the oil pressure value of the engine lubrication
system. The oil pressure values of the engine at
idling speed and under normal working speed
are different.
I n i d l i n g , We i c h a i W P 1 2 e n g i n e o i l
pressure ≥ 150 kPa;
In idling, the Hangzhou Engine MC11
engine oil pressure ≥ 100 kPa.
When engine oil pressure is too low, the
oil pressure warning indicator light at bottom
right of the engine oil pressure gauge goes on,
indicating the engine lubrication system failure.
You should stop and check for troubleshoot, to
avoid aggravating the mechanical wear of the
engine, the details can be found in the engine
manual.
7. Engine water temperature gauge (4 in
Figure 6-4)
The engine water temperature gauge
indicates the temperature of the coolant. In
the case of normal driving, the pointer is
approximately in the half position, i.e. the
normal working temperature of the engine is
80 to 95°C. When driving at high speed or
climbing steep slopes in high temperature areas,
the pointer moves towards the red sector. If the
engine water temperature is too high, the water
temperature alarm indicator light at the bottom
right of the water temperature gauge will go
on, you should immediately stop the vehicle in
a safe place, and let the engine idle, so that the
water temperature return to the normal state.
8. Indicator light assembly (Figure 6-7)
The indicator lights indicating vehicle
operation conditions.
9. Speed odometer (1 in Figure 6-4)
The speed odometer consists of the speed
meter and odometer, in which the speed meter
indicates the traveling speed, and the odometer
records the total mileage.
10. Lighting master switch (4 in Figure 6-10) (2 in
Figure 6-11)
When lacking of light within the field
of view, the lighting master switch should be
turned on, and reset it when not using.
11. Fog lamp switch (6 in Figure 6-10)
and fog lamp indicator light (3 and 23 in
Figure 6-7)
The components and functions of lower crane portion
6-17
Courtesy of CraneMarket.com