Protective Devices - XCMG XCT80 Operation Manual

5. Front panel control switch
The cab front panel control switch is
located in the left side of the driver near the
floor (see Figure 6-20). You can open the front
panel in the cab by pulling up this switch, to
facilitate the inspection and repair of the interior
pipe line in the cab.

6-3-4 Protective devices

Material: Q235;
Structure: Frame-covering structures;
Joints and form: a. rear shield is connected with frame by welding;
b. side shield is connected with platen by bolts;
Dimensions see XCT80 the protective devices schematic diagram (Figure 6-21) of the lower crane
portion.
6-22
The components and functions of lower crane portion
XCT80 Truck Crane Operation Manual
Figure 6-19 Front panel
Figure 6-20 Front panel control switch
Courtesy of CraneMarket.com