XCMG XCT80 Operation Manual page 161

XCT80 Truck Crane Operation Manual
7. Manipulate the "balance weight cylinder lift switch" on the remote control box, so that the
balance weight cylinder is fully retracted, the lifting balance weight disengages with the frame. Confirm
the plane of the suspension flexible balance weight mates firmly with the fixed balance weight lower
surface, and lift the balance weight to the highest position, then the balance lifting limit indicator light
goes on (Figure 9-17).。
Balance weight cylinder
lifting switch
Slewing switch
Figure 9-18 Balance weight remote control box (fixed blow the turntable left boom hinge rear point)
Figure 9-19 Balance weight cylinder extending/lifting position schematic
When adjusting for hanging balance weight, one must operate using the operating remote
control box
Balance weight cylinder
extending positionx
Balance weight mounting
pedestal opening
Balance weight remote
control box
Balance weight cylinder
lifting position
Crane accessory
Courtesy of CraneMarket.com
9-19