XCMG XCT80 Operation Manual page 119

XCT80 Truck Crane Operation Manual
Steering process:：
a. Intermediate position: when the vehicle
travels in straight, the steering wheel will not
rotate is if no steering force is applied to the
steering wheel.。
b. Steering process: When the vehicle
needs steering, the driver turns the steering
wheel to achieve steering, the vehicle will turn
left by turning the steering wheel to the left, and
the vehicle turns right by turning the steering
wheel to the right.
c. Return process: after steering, if you
no longer rotate the steering wheel, the wheel
will turn to straight traveling position under
the rotary moment, until the vehicle travels in
straight.
d. Return process: after steering, if you
no longer rotate the steering wheel, the wheel
will turn to straight traveling position under
the rotary moment, until the vehicle travels in
straight.
●Power steering gear works relying
on engine-driven steering pump. The vehicle
shall not glide after the engine is shut down.
Otherwise the steering will be heavy, which
may result in an accident.
●When the steering system has as a
failure due to the oil pump or oil line, the
steering gear can be used as a mechanical
steering gear, to force steering to the repair
place. Forced steering for a long time can
damage the steering gear.
When steering, you should try to avoid
turn the steering wheel to the limit position.
Traveling Status on Highway
7-15
Courtesy of CraneMarket.com