Start Lower Crane Portion Engine - XCMG XCT80 Operation Manual

XCT80 Truck Crane Operation Manual

7-2-2 Start lower crane portion engine

1. Start ignition switch
Check the gearbox in neutral, turn on the
ignition switch, insert the key and turn to the
"START".
In the following situations the indicator
lights and warning lights should be on:
a. Engine oil pressure alarm light;
b. Charging indicator light;
c. Handbrake light;
d. If the brake circuit pressure is less than
0.5MPa, the pressure warning lights of the brake
circuits I and II are on;
e. Engine power indicator light.
2. Start lower crane portion engine
The specific use of the engine is shown in
the "Engine Manual".
Figure 7-6 Start switch
When starting the engine or ignition
switch, the indicator light is used as the alarm
light in system detection. Timely replace the
faulty lights.
Traveling Status on Highway
7-9
Courtesy of CraneMarket.com