Hdd Information - Strong SRT 3000 Installation Instructions Manual

6: Press 6 to add all files of this directory/folder to the play list. Press 6 again to delete all files from
the play list.
7: Press 7 to open the Edit menu. This menu allows access of the following functions by entering
the number: rename 4, copy 5, delete 6, create folder 7.
2: Press 2 to open the sort window. You can sort by Name/Time/Size and Favourite.
i: Press the i button to set repeat mode. The option is Repeat Folder/Random Folder/Repeat One.
eXiT:
One step back or leave the folder and quit the function.
image:
4: Press 4 to open a previously created play list. With the coloured buttons you can make changes
to the list.
5: Press 5 to add a file to the playlist. A favourite icon will be shown next to the file. (a single file
will be added to the play list) or 6 (all files of this directory/folder will be added to the play list).
6: Press 6 to add all files of this directory/folder to the play list. Press 6 again to delete all files from
the play list.
7: Press 7 to open the Edit menu. This menu allows access of the following functions: rename 4,
copy 5, delete 6, create folder 7.
2: Press 2 to open the sort window. You can sort by Name/Time/Size and Favourite.
i: Press i to access slideshow settings. You can change the slide time and slideshow repetition.
3: Press 3 to show the files in a preview of 3x3 pictures.
eXiT:
One step back or leave the folder and quit the function.
* This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via
USB has not yet been installed.

7.5.2 hDD information

This option shows relevant information about the connected USB device. In this menu you can also format your USB
storage device and setup the recording type.
Select HDD Information in the Media menu and press ok to enter.
Now you will see all details as Free and the used Recording Sizes and the used file system.
Press the YeLLoW button Format to format the connected USB device.
Please, enter your PIN code to access this menu and press ok to start formatting.
Warning:
Formatting will permanently delete ALL data stored on the connected device. Please make
a backup copy of all data you wish to keep before entering the HDD Format menu. STRONG
cannot be held responsible for loss of data from USB devices used with this receiver.
noTe:
It is possible to use USB storage devices already formatted in NTFS.
Press eXiT to leave this menu.
7.5.3 DvR setting*
This menu allows you to configure settings for Timeshift, recording and playback.
Select DVR Setting in the Media menu and press ok to enter.
Use pq to move the highlight and tu to change settings.
Timeshift: Select between Auto, Pause or Off. When Timeshift is set to Auto it will automatically start every
time after tuning to a channel. When Timeshift is set to Pause it will start only after pressing the
YeLLoW/2 button. Select Off to deactivate Timeshift.
30 sec to 30 min. Set the time step you like to jump forward to by pressing 4 during playback of
Step to:
recorded files. This only works when the info banner is displayed on screen. If it is not, press i.
Time Shift to Record: If set to On the timeshifted part will be included in your recording when you start to record the
current programme.
16