Commissioning; Mma Welding Commissioning; Mma Welding - Fronius Welducation Simulator Operating Instructions Manual

Commissioning

MMA welding

commissioning
1
2
MMA welding
The following settings, which are made on the power source in reality, are made
in the simulation using the Welducation Campus software:
-
-
1
2
3
Depending on the type of electrode, insert the return lead cable into the (-)
current socket or into the (+) current socket and turn it clockwise to lock.
Depending on the type of electrode, insert the bayonet connector of the
electrode holder cable into the free current socket with opposite polarity and
turn it clockwise to lock.
Selecting the welding processes
Selecting and setting the welding parameters
Select the STICK process.
Select and set the welding current parameter.
Select the polarity.
In reality, information on whether the
stick electrode is for (+) or (-) welding
can be found on the stick electrode
packaging.
With the Welducation Simulator, the
supplied stick electrode can be used
for all available scenarios on (+) and (-).
67