Array Details - enphase IQ8 Design Manual

D. The telemetry graph provides an option to see multiple parameters in a line graph, as shown in
the following graph. The installer can select multiple parameters, as shown at the bottom of
the graph. The Enphase Installer Portal also offers an option to include events-related details
to be included in the telemetry graph.

6.2 Array details

A. Array builder allows the user to create/edit/delete a branch circuit component. A branch
circuit is always mapped to a gateway, and the Installer shall be able to find all the
microinverters that are part of the gateway and the branch circuit.
After commissioning, each microinverter shall show phase information of each microinverter in
the array view.
54
Figure 31: Telemetry data
Figure 32: Array Builder
© 2023 Enphase Energy Inc. All rights reserved.
IQ8 Commercial Microinverter grid-tied PV system
November 2023
USG-00026-1.0