enphase IQ8 Design Manual page 46

NOTE: Do not use the PLC scan function on the gateway to detect the IQ8 Commercial
Microinverters.
G. You can assign the scanned microinverters to the array.
•
Array Builder in Enphase Installer App or Enphase Installer Portal supports the
assignment of two panels to a microinverter.
•
Array Builder allows importing of CAD files (.dwg, .png, and .jpg) for background details.
•
Array Builder provides an option to upload a photo of the layout to scan multiple
inverters.
H. The Enphase Installer App displays the "line-to-line" phase information for each microinverter
that belongs to IQ Gateway Commercial 2.
•
The line connection parameter for a microinverter is provided by the gateway to the
Enphase Installer Platform and to the Enphase Installer App through AP mode. The
installer cannot change the line-to-line info directly in the Enphase Installer App, but on
refreshing the microinverter detailed screen, the value is updated by the gateway.
•
The installer can also see the line-to-line connection info in the array builder to easily
recognize the microinverter phase connection.
•
The installer can filter the microinverters based on the line-to-line connection in the
Enphase Installer App.
46 © 2023 Enphase Energy Inc. All rights reserved.
IQ8 Commercial Microinverter grid-tied PV system
November 2023
USG-00026-1.0