Array Builder Using Enphase Installer Portal; Iq8 Commercial System Commissioning Process - enphase IQ8 Design Manual

5.1.2 Array Builder using Enphase Installer Portal

Use the Enphase Array Builder to build your virtual array. You can find a link to Array Builder on the
System Activation form or on the Settings page.
Array builder allows importing of .png and .jpg for background details.
Follow the steps in the videos found here
to-build-an-array-layout-in-the-enphase-installer-portal.

5.1.3 IQ8 Commercial System commissioning process

Step 1: System details
A. Open Enphase Installer App. Tap the Systems tab on the lower left side of the screen.
B. If an activation has not previously been completed using the Enphase Installer Portal,
complete Step 1 in the Enphase Installer App (input system details including address grid
profile, phase and voltage details, and so on).
A grid profile is not selected by default for an activation created in the Enphase Installer Portal.
When prompted, select the default profile for your area.
44
Figure 24: System activation using Enphase Installer
https://support.enphase.com/s/article/how-
Figure 25: Array Builder using Enphase Installer
© 2023 Enphase Energy Inc. All rights reserved.
IQ8 Commercial Microinverter grid-tied PV system
November 2023
USG-00026-1.0