1: Throttle Pedal; 2: Foot Brake Pedal; Parking Brake; Steering - Taylor-Dunn B-210 Operator's Manual

MB-210-14

1: Throttle Pedal

The throttle pedal is located to the right of the
brake pedal. It controls the speed of the vehicle
and operates similar to the throttle pedal in an
automobile. Press the pedal to increase speed
and release the pedal to decrease speed.

2: Foot Brake Pedal

The foot brake pedal is located to the left of
the throttle pedal. This pedal is designed for
operation with the drivers right foot. It works
similar to the brake in an automobile. Applying
pressure to the brake pedal slows the vehicle
according to the amount of pressure applied.
Relieving pressure from the pedal releases the
braking action.

Parking Brake

The parking brake is actuated with a hand lever,
which is located to the right of the driver. To set
the parking brake, push down on the brake pedal
and pull the lever up and back until it locks. To
release the park brake, press the foot brake
pedal and push the brake lever forward and all
of the way down.
B-210 / B-200 Curtis System Operator Manual

Steering

The steering wheel and steering system are
similar to an automobile. To turn right, turn the
steering wheel clockwise. To turn left, turn the
steering wheel counter-clockwise.

Turn Signal Switch

Optional. The turn signal switch lever is located
on the left side of the steering column. Push
the lever forward to activate the right turn signal
and pull the lever back to activate the left turn
signal. The switch is not self canceling. You must
return the switch to the center, off position after
the turn is completed.

Hazard Light Switch

The hazard light switch is located on the Turn
Signal Switch. The switch is a small tab or
knob under the turn signal lever. To activate
the hazard lights, pull the tab out. To turn the
hazard lights off, push the turn signal lever
forward or back.
Page 19