Table of Contents
Advertisement
MB-210-14
Lester Summit Charger
Description of Operation
The Summit charger is designed as an automatic charger. It is available with charging profiles
for SLA and FLA batteries. Refer to the spec plate on the charger for the type of battery it is
configured for. Use of different batteries not listed on the spec plate may result in premature
failure of the batteries.
The charger turns itself on when it is plugged into the wall outlet and turns off when the batteries
are fully charged. The charger continues to monitor the battery voltage and if the battery voltage
drops below a threshold value, then the charger will turn on again for a short cycle to keep the
batteries topped off.
There are three lamps on the charger used to indicate
the active charging status and if any faults occurred
during the charging cycle.
B-210 / B-200 Curtis System Operator Manual
Status Lamps
Page 39
Advertisement
Table of Contents
