Throttle Pedal; Foot Brake Pedal; Parking Brake; Horn Switch - Taylor-Dunn 2018 BIGFOOT G-1500 Operator's Manual

Throttle Pedal

The throttle pedal is located on the floorboard
and is intended to be operated by the drivers
right foot. It controls the speed of the vehicle
and operates similar to the throttle pedal in an
automobile. Press the pedal to increase speed
and release the pedal to decrease speed.

Foot Brake Pedal

The foot brake pedal is located to the left of
the throttle pedal. This pedal is designed for
operation with the drivers right foot. It works
similar to the brake in an automobile. Applying
pressure to the brake pedal slows the vehicle
according to the amount of pressure applied.
Relieving pressure from the pedal releases the
braking action.

Parking Brake

The parking brake is actuated with a hand lever,
located to the right of the driver on the kick panel.
To set the parking brake: Press the brake pedal
and push the lever forward and down until it
locks.
To release the park brake: Pull the lever up and
all the way back to the kick panel.
Note: The parking brake can be adjusted
by rotating the knob on the end of the
handle.

Horn Switch

The horn switch is designed to be operated
with the drivers left foot. The switch is located
to the left of the steering column. To activate the
vehicle horn, press the switch with your left foot.

Shift Lever

The shift lever is located to the right of the driver
between the seats. Details regarding the shift
lever can be found on the following pages.
Page 20

Choke

The choke increases the amount of fuel in the
mixture and only needs to be used when starting
a cold engine. Refer to starting the engine for
details.

Seat Adjust

WARNING
DO NOT attempt to adjust the driver
or passenger seats while the vehicle is
in motion. Adjusting the seat while in
motion could result in sudden and violent
uncontrolled movement of the seat. The
sudden movement of the seat could cause
the driver to lose control of the vehicle
or eject the occupant from the vehicle
resulting in severe personal injury and/
or property damage.
The position of the driver and passenger seats
can be adjusted. The adjustment levers are
located under the seats.
To move the seat forward or backward:
1. Stop the vehicle.
2. Push the lever under the seat to unlatch
the seat.
3. Move the seat to the desired position
(forward/back).
4. Release the lever once you have reached
the desired position.
5. Make sure the seat has locked securely
before driving the vehicle.
Bigfoot G-1500 Operator Manual
MB-440-09