Table of Contents
Advertisement
MC-425-12
1: Turn Signal Switch
The turn signal switch lever is located on the left side of the
steering column. Push the lever forward to activate the right
turn signal and pull the lever back to activate the left turn
signal. The switch is not self canceling. You must return the
switch to the center, off position after the turn is completed.
2: Hazard Light Switch
The hazard light switch is located on the Turn Signal Switch.
The switch is a small tab or knob under the turn signal lever.
To activate the hazard lights, pull the tab out. To turn the
hazard lights off, push the turn signal lever forward or back.
1: Steering
The steering wheel and steering system are similar to an
automobile. To turn right, turn the steering wheel clockwise.
To turn left, turn the steering wheel counter-clockwise.
3: Foot Brake Pedal
The foot brake pedal is located to the left of the throttle pedal.
This pedal is designed for operation with the drivers right
foot. It works similar to the brake in an automobile. Applying
pressure to the brake pedal slows the vehicle according to
the amount of pressure applied. Relieving pressure from
the pedal releases the braking action.
2: Throttle Pedal
The throttle pedal is located to the right of the brake pedal.
It controls the speed of the vehicle and operates similar
to the throttle pedal in an automobile. Press the pedal to
increase speed and release the pedal to decrease speed.
Horn Switch
Press the horn switch to sound the horn, release it to turn it off.
Park Brake
The parking brake is actuated with a hand lever, which is
located to the right of the driver. To set the parking brake,
push down on the brake pedal and pull the lever up until
it locks. To release the park brake, press the foot brake
pedal, pull up on the park brake handle, push the release
button, and lower the handle.
Huskey C-425 Sevcon DC System Operator Manual
Page 19
Hide quick links:
Advertisement
Table of Contents
