Removing The Left Engine Case; Duke) - KTM 125 Duke 2013 Repair Manual

16 ENGINE
16.3.60 Removing the left engine case (200 Duke)
–
Remove screws .
1
–
Swing the left section of the engine case up and remove the fitting of the engine fixing arm.
–
Pull oil filter
Circlip pliers reverse (51012011000) (
305877-10
–
Mount special tool
Pressure screw for crankshaft (90129020000) (
305879-10
–
Mount special tool
Case separating tool (90129048000) (
Info
Use the drill hole marked with 901.
–
Pull off the section of the engine case by screwing in the screw.
Info
305880-10
Do not wedge the engine case section.
The washer of the main shaft usually sticks to the bearing.
–
Take off the left section of the engine case.
–
Remove the special tool.
out of the oil filter housing.
3
305878-10
.
2
with suitable screws.
3
p. 272)
p. 277)
p. 278)
134