Table of Contents
Advertisement
19
LUBRICATION SYSTEM
Main work
–
Place a suitable container under the engine.
–
Remove screws
304892-10
–
Remove oil filter
Circlip pliers reverse (51012011000) (
304893-10
–
Position the special tool with the O-ring. Mount and tighten the screws.
Guideline
Screw, oil filter cover (125 Duke)
Screw, oil filter cover (200 Duke)
Oil pressure adapter (75029094000) (
–
Connect the pressure tester to the special tool without the T-plate.
Pressure testing tool (61029094000) (
304894-10
–
Check the engine oil level. (
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine.
–
Check the engine oil pressure.
Engine oil pressure
Coolant temperature: ≥ 70 °C
(≥ 158 °F)
Engine speed: 1,500 rpm
Coolant temperature: ≥ 70 °C
(≥ 158 °F)
Engine speed: 5,000 rpm
»
If the specification is not reached:
–
Check oil pumps for wear. Check all oil channels for free flow.
–
Switch off the engine.
Warning
Danger of burns Some vehicle components get very hot when the machine
is driven.
–
–
Remove the special tools.
–
Insert the new oil filter.
. Take off the oil filter cover with the O-ring.
1
.
2
p. 216)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Wear appropriate protective clothing and safety gloves. In case of burns,
rinse immediately with lukewarm water.
p. 272)
M5
8 Nm (5.9 lbf ft)
M5
8 Nm (5.9 lbf ft)
p. 275)
p. 274)
≥ 0.7 bar (≥ 10 psi)
≥ 2.4 bar (≥ 35 psi)
217
Advertisement
Table of Contents
