Removing The Cylinder Head (125 Duke); Removing The Piston (125 Duke) - KTM 125 Duke 2013 Repair Manual

16 ENGINE

16.3.11 Removing the cylinder head (125 Duke)

16.3.12 Removing the piston (125 Duke)

–
Remove screws
304444-10
–
Release screws
–
Take off the cylinder head.
304739-10
–
Take off the cylinder head gasket
–
Remove dowels
304740-10
–
Remove timing chain guide rail
304741-10
–
Push the cylinder upward.
Info
Push the cylinder upward only far enough to allow removal of the piston pin.
–
Remove piston pin retainer
–
Remove the piston pin.
–
Take off the cylinder with the piston.
–
Push the piston upward out of the cylinder.
304743-10
Info
If no other work is required on the cylinder and the piston, you can leave the
piston in the cylinder.
.
1
in a crisscross pattern and remove them with the washers.
2
.
3
.
4
.
5
.
1
112