Carriage Components; Standard Equipment; Options And Accessories - Fronius FDV 80 Operating Instructions Manual

Carriage components

Standard
- 4-wheel drive via pulse motor
equipment - Wheels with polyurethane tread, one side with a groove
- Integrated distance measurement system
- Reinforcement with mounting pin for wire-feed unit
- 4 transportation lugs
- Power supply and PLC power module
- Mains cable with plug (12m)
- Control line to power source (10m)
Options and
- FRC-40 remote control with cable (3m)
accessories - Holder for FRC-40 remote control
- Mechanical weld tracking system
- Torch holder and adjustment units
- FRR reducing rings for torch holder
- Steel guide rollers with / without groove
- Linear axis unit FAU 50 -100 / SD 600 or FAU 50 - 100 SD 1100
- FAU 50-100 cradle I-kit (needed when 2 torches are used)
- Limit position function I-kit
- Guide rollers, with lateral adjustment
- VR holder for two wire-feed units
FDV 80 accessories
Configuration 1: Use of one torch:
Linear axis unit FAU 50 - 100 / SD 600 / ML 20 (Cradle I-kit included)
Configuration 2 and 3: Use of two torches:
Linear axis unit FAU 50 - 100 / SD 1100 / ML 20
Cradle I-kit for the second torch
Wire-feed
unit
Configuration 1
FDV 80
Configuration 2
5
Remote
control
Configuration 3