Table of Contents
Advertisement
Option: setting
the lateral guides
Some carriage configurations have, in addition to the guide rollers, two lateral guides (a)
that guide the carriage. The guides and rollers can be installed facing towards the centre,
or even swapped over or rotated so that both rollers face outwards.
To adjust the guides, proceed as follows:
1.
2.
3.
Carriage strain
To attain optimum wirefeed, observe the following when connecting and routing the
relief
hosepack:
-
-
-
Hosepack handling
Loosen the two fixing screws (b) on both lateral guides.
Extend the lateral guides to the desired length.
Tighten the fixing screws (b).
Do not allow the hosepack to become kinked
Always lay the hosepack as straight as possible
Suspend hosepack if necessary. Use balancer and hosepack holder.
(a)
11
(b)
Advertisement
Table of Contents
