Declaration Of Conformity - Softing NETLink S7-Compact User Manual

NETLink S7-Compact - User Guide
12

Declaration of conformity

This device is compliant with EC directive 2014/30/EG, "Electromagnetic Compatibility" (EMC
directive) and meets the following requirements:
§
EN 55032:2012/AC:201
§
EN 61000-6-4:2007/+A1:2011
§
EN 61000-6-2:2005/AC:2005
§
EN IEC 6300:2018
52
Note
To fulfill the EMC requirements, the other components of your installation (DC
adapter, Industrial Ethernet devices, etc.) also have to meet the EMC requirements. A
shielded cable must be used. In addition, the cable shield must be grounded properly.
CAUTION
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures!
CE
The CE marking indicates conformity with the above standards in a Declaration of
Conformity which can be requested from Softing Industrial Automation GmbH.
RoHS
This product is compliant the Restriction of Hazardous Substances under Directive
2002/95/EC.
WEEE
Electrical and electronic equipment must be disposed of separately from normal waste
at the end of its operational lifetime in compliance with Waste Electrical & Electronic
Equipment (WEEE) Directive 2002/96/EC. Packaging material and worn components
shall be disposed of according to the regulations applicable in the country of
installation.
Electromagnetic compatibility of multimedia equipment
(MME) and interference emission
Electromagnetic compatibility (EMC); Part 6-4: generic
standard – emission for industrial environments
Electromagnetic compatibility (EMC); Part 6-2: generic
standard - immunity for industrial environments
Technical documentation for the assessment obf electrical
and electronic products with respect to the restriction of
hazardous substances
Version EN-062023-1.00