RGBlink mini-mx User Manual page 73

Version Amendment Description:
V 1.0.51
1.Modification
· The last option was not selected when entering the
CAPTION interface for the first time
· The thumbnail is not replaced after the scene is
saved
·Revise NET in Network to Cable and Mobile
2.Optimization
· Stuck on the boot LOGO interface when the
program starts
· Screen stuck problem and invalid tapping on touch
screen when the program is started
· Screen stuck problem and invalid tapping on touch
screen when the program is running.
·Scene switch
V 1.0.49
1.Modification
·Upgrade interface style
·PIP interface and scale, crop setting interface
·A B layer automatic mutual cutting problem
·Updating the recording or streaming time at the
bottom of the main interface
2.Optimization
·LOGO display problem when booting
· PVW double-click display effect, double-click to
enlarge the picture of the corresponding signal
source or PST/PGM
·Failure on matting
·PIP layer switch
·System information display at the bottom of the
main interface
·EFFECTS interface
·Background and LOGO interface
·Multi-platform live streaming and simultaneous
recording
·Media interface prompts an abnormal info
·PTZ control
·LOGO/CAPTION blurred screen
·Run slowly when recording
·Synchronous indicator display of ON AIR、ON AIR
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
3.New
· Added communication port setting in PTZ
interface
·Fade in and fade out for layer switch signal
source
· Add the limit that the upper and lower limits
of the cutout interface do not exceed each
other
3.New
· In the PVW screen, double-click the REC
button to enter the RECORD interface
· In the PVW screen, double-click the ON AIR
button to enter the STREAM interface
· Correspondence of BACKGROUND,LOGO
buttons and physical buttons in the main
interface
·Save up to 16 presets
·PTZ tilt control
·Custom special effects audio setting
· Add streaming duration and recording
duration in main interface
·CAPTION settings
· Double click audio status display area in
PVW to enter audio management interface
·Click to select the layer to zoom in and out
with two fingers when PVW is in full mode.
·Use adjuster to adjust layer size in PVW
·Use joystick to adjust layer position in PVW
72